Friday, June 8, 2012

Playing with Light

I'm always messing around with the cool things you can do with a camera. There's something about the ability to record light over a period of time...it's almost like your stopping time, or putting a movie on a single frame.

The other night I headed out to our pumptrack with a new headlamp I got for my birthday. A number of people like to ride at night here in the desert, and I've been wanting to give it a try. I also knew that the light would give me a unique opportunity for photos.

I set up my camera on a tripod and after a bit of trial and error, landed on the settings you see here. After that it was just a matter of using the remote timer to press the shudder run to my bike and make a lap, then head back over to the camera to see what happened.

The picture shown here is my favorite of a few. I've got a few ideas to make some shots more unique in the future but it was a fun experiment .


Tuesday, June 5, 2012

Wheel Building


This week I built a wheel for the second time in my life. It had been long enough that I couldn't remember how to do it but with the trusty Internet there to give me some step by step instructions, I was able to go from what you see in the picture to a trued wheel mounted on my bike in about three hours. 

Specifically, I was putting a new Sun-Ringle MTX 33 rim and DT champion spokes on my trusty old Wheel Tech single speed hub. The wheel came off my DJ bike, which had seen a few to many sideways landings. The rim was bent to the point that getting it even a little bit true required spokes on one side so tight (and so loose on the other side) that I didn't feel safe jumping it anymore. So I picked up a new rim with a little more width, some new spokes, and went to town. 

If you've never done it, I wouldn't exactly call it easy. There are a lot of little things that need to be done just right and the instructions can be a bit confusing. But once you catch onto the gist of how the hub, spokes, and rim go together, actually putting it together isn't very hard. Finishing a wheel comes with a nice sense of accomplishment and I recommend everybody taking an opportunity to build a wheel sometime. 

Besides the parts, all you need is a screwdriver, but it helps to have a drill and helps a lot to have a truing stand when it comes time to dial the wheel in. A simple Google search will provide a handful of instructional articles or videos. Take your pick.  Now it's time to go ride my bike and see if my build holds up!

Tips:
  • Grab some liquid refreshment and throw on a movie or some music. 
  • Sit down.
  • Be patient, get it right the first time.
  • Don't drop spoke nipples into a recessed rim.
  •  
Have you had any experience with wheel building?